Tile Installation in Palm Coast, FL
AT A GLANCE
Service - Tile installation — floors, bathrooms, kitchens, pool decks, patios, and outdoor living
Location - Palm Coast, FL — all sections — Flagler County and surrounding areas
Pricing - Tile from $8/sq ft | Large format from $12/sq ft | Natural stone from $15/sq ft — free estimates
Timeline - Most floors 1–5 days | Bathrooms 3–5 days | Pool deck 2–4 days
Includes - Surface assessment, leveling, mortar bed, tile setting, grouting, sealing, debris removal
Contact - (786) 833-5612 | ygtilesolution@gmail.com
Looking for a tile installer in Palm Coast who preps the subfloor correctly, shows up on schedule, and personally does the work they quoted you?
YG Tile Solution is based in Palm Coast and installs tile throughout Flagler County and the surrounding Space Coast. Yohan personally works every job — no subcontractors, no handoffs. Whether you're installing a new porcelain floor in a C-section home, retiling a Grand Haven bathroom, or putting travertine around a pool deck in Belle Terre, we bring the same prep-first, no-shortcuts standard to every project. Transparent pricing, debris removal always included, and free written estimates for every job. Call (786) 833-5612.
Owner-operated — Yohan personally works every tile installation in Palm Coast, no exceptions
Subfloor assessment on every job — flatness, moisture, and levelness checked before any tile is set
Tile installation from $8 per sq ft — free written estimates with itemized pricing
All tile types — porcelain, ceramic, natural stone, travertine, large format, mosaic, and outdoor tile
Debris removal always included — no dumpster rental needed
Most Palm Coast tile estimates scheduled within 24 to 48 hours.
Tile Installation Pricing in Palm Coast, FL
Tile installation pricing in Palm Coast depends on tile format, material type, subfloor condition, and project scope. Here are realistic price ranges based on our actual work throughout Flagler County:
| TILE TYPE / SCOPE | TYPICAL RANGE | NOTES |
|---|---|---|
| Standard ceramic or porcelain floor | $8 – $12/sq ft | Includes labor, mortar, grout, and seal. Standard format up to 18x18. |
| Large format porcelain (24x24 and up) | $12 – $18/sq ft | Requires flatter substrate. Leveling clips, back-butter, precision layout. |
| Natural stone (travertine, marble, slate) | $15 – $22/sq ft | Includes initial sealing. Stone requires more prep than porcelain. |
| Shower wall tile installation | $10 – $16/sq ft | Includes backer board, waterproofing, tile, grout, seal. |
| Kitchen backsplash tile | $400 – $1,200 total | Depends on linear footage and tile complexity. |
| Pool deck tile (porcelain or travertine) | $10 – $18/sq ft | Exterior-rated materials, DCOF-rated for wet surfaces. |
| Patio tile or pavers | $8 – $16/sq ft | Properly compacted base, drainage slope, exterior materials. |
Tile Installation Services We Offer in Palm Coast
We install tile for every application in Palm Coast homes — interior floors, wet areas, outdoor spaces, and feature installations. Here is the full scope of what we handle throughout Flagler County:
Tile Floor Installation
Porcelain, ceramic, and natural stone floors for living rooms, kitchens, dining rooms, hallways, entryways, and bedrooms throughout Palm Coast homes. Every floor installation includes a full subfloor assessment, leveling and patching where needed, moisture barrier on all slab-on-grade installs, and expansion joints at all perimeter walls and transitions.
Bathroom Tile Installation
Shower wall tile, shower floor tile, bathroom floor tile, and vanity backsplash tile throughout Palm Coast bathrooms. For full bathroom remodels including demo and waterproofing, see our dedicated Palm Coast bathroom remodeling page.
Kitchen Backsplash Tile
Subway tile, herringbone, large format porcelain, and mosaic backsplash installations for Palm Coast kitchens. We handle precise cuts around outlets, switches, and range hoods. Most kitchen backsplash installations complete in one day.
Large Format Tile Installation
24x24, 24x48, and 32x32 large format porcelain tile is our most requested floor tile in Palm Coast right now. Large format requires a flatter substrate than standard tile — we use leveling clips and back-butter every piece to achieve the tight tolerances required for a flat, lippage-free finish.
Pool Deck Tile
Slip-resistant porcelain and travertine for pool decks throughout Palm Coast and Flagler County. We specify tile with a minimum DCOF rating of 0.42 for all wet surfaces and use exterior-rated setting materials for Florida's UV and humidity. For a dedicated pool deck tile page with pricing and process details, see our Pool Deck Tile page.
Patio Tile and Pavers
Large format porcelain and concrete pavers for patios, walkways, and outdoor living areas. We prepare a properly compacted, level base and ensure adequate drainage slope before any patio tile goes down. Florida's daily rain requires correct drainage on every outdoor installation.
Outdoor Kitchen Tile and Stone
Countertop tile, island facades, bar fronts, and stacked stone veneer for outdoor kitchen installations in Palm Coast. We use UV-stable porcelain for countertops and cooking surfaces — standard quartz is not rated for direct Florida outdoor sun and will fade within 2 to 3 years.
For bathroom remodeling specifically → /bathroom-remodeling-palm-coast-fl
For pool deck tile specifically → /pool-deck-tile
For patio pavers specifically → /patio-pavers-or-tile
For outdoor kitchen stone → /outdoor-kitchen-stone
Why Subfloor Prep Determines Whether Your Palm Coast Tile Lasts
Here's what proper prep looks like on every YG Tile Solution job in Palm Coast:
Flatness assessment — we check for high spots, low spots, and out-of-plane areas that will cause lippage or hollow tile
Leveling and patching — we use self-leveling compound or grind down high spots before any tile is set
Moisture testing — we check slab moisture on any install where moisture intrusion is a risk
Correct setting materials — large-format porcelain requires different thinset and back-buttering technique than standard ceramic; we match the mortar to the tile
Movement joints — we place expansion joints at doorways and perimeter edges to account for Florida's thermal movement
Substrate repair — any soft, delaminated, or water-damaged areas are fixed before tile goes down, not covered up
Tile is only as good as what it is bonded to. In Palm Coast and Flagler County, most homes sit on concrete slab-on-grade foundations — and the condition of that slab before installation determines whether your tile floor lasts 30 years or starts cracking, popping, and hollowing within a few.
Florida's seasonal humidity causes concrete to expand and contract more than in northern climates. That makes proper movement joint placement, moisture barrier installation, and substrate flatness critical steps that many contractors skip entirely to save time or money on a bid. We do not skip them.
The #1 reason tile fails prematurely in Florida homes:
Contractors who skip or rush subfloor prep to save time. Tile set over an unlevel, unbonded, or moisture-compromised substrate will crack, pop, and hollow — sometimes within months. Our prep takes longer. Your tile lasts longer because of it.
Tile Types We Install in Palm Coast Homes
We work with all major tile types and formats. Here's what we install most often in Flagler County homes — and what each is best suited for:
Ceramic Tile
Great for walls, backsplashes, and lower-traffic floor areas. Ceramic is lighter and easier to cut than porcelain, making it a good choice for detailed pattern work and wall installations.
Porcelain Tile
The most popular choice for Palm Coast floors and bathrooms. Porcelain is dense, nearly impervious to moisture, and handles Florida's humidity and temperature swings better than almost any other flooring material. We install standard, large-format, and rectified porcelain throughout Flagler County.
Large-Format Tile (24x24, 24x48, 32x32, Larger sizes available)
Large-format tile creates a clean, modern look with fewer grout lines — but it requires a flatter substrate than standard tile. We use lippage clips and back-butter every piece to keep large-format installations perfectly flat.
Natural Stone (Travertine, Marble, Slate)
Natural stone adds character and value to Palm Coast homes — especially in bathrooms and outdoor living spaces. Stone requires sealing on installation and periodic maintenance; we include initial sealing in every stone tile quote.
Textured and Slip-Resistant Tile
Required for pool decks, outdoor patios, and wet bathroom floors. We spec tile with a minimum DCOF (Dynamic Coefficient of Friction) of 0.42 for wet areas — the industry standard for slip resistance.
Palm Coast Neighborhoods Where We Install Tile
Palm Coast B, C, F, P, R, S, and W sections — slab-on-grade residential tile installations
Grand Haven — large format porcelain floors and premium bathroom tile in golf course community homes
Belle Terre — kitchen backsplash tile, bathroom tile, and LVP flooring combination projects
Matanzas Woods — full-home tile and flooring replacements in established neighborhood homes
Seminole Woods — porcelain tile floors and bathroom remodels
Lehigh Woods — tile installations in mid-size family homes throughout the W sections
Palm Harbor — waterfront and Intracoastal-adjacent homes with outdoor tile and pool deck work
Flagler Beach — barrier island homes with salt air-rated exterior materials and marine-grade grout
Bunnell — tile installations in older Flagler County homes, including terrazzo subfloor prep
Beverly Beach — oceanfront and coastal properties with exterior-rated tile installations
We install tile throughout Palm Coast and all of Flagler County. Recent projects have included homes in:
Have a project in a Palm Coast neighborhood not listed here? Call or text (786) 833-5612 — we serve all of Flagler County and surrounding areas.
Our Kitchen Remodeling Process in Palm Coast
Every kitchen remodel is different in scope — a backsplash replacement is a one-day job, a full kitchen gut-and-rebuild is a multi-week project. Here's how we approach both ends of the spectrum.
Simple, clean, and on schedule
Step 1 — Free Estimate
We visit your Palm Coast home, assess the existing surface, measure the installation area, check subfloor flatness and moisture, and provide a free written itemized quote. No charge, no obligation. Most estimates delivered within 24 to 48 hours of our visit.
Step 2 — Material Selection
We advise on tile selection for your specific application — considering your budget, design preferences, traffic level, and the performance demands of your space. We do not upsell materials you do not need.
Step 3 — Prep
Grinding, patching, and leveling the substrate to the flatness tolerance required for your selected tile format. Moisture barrier where needed. Movement joints placed before tile setting begins.
Step 4 — Layout + Setting
Tile layout planned from center out to ensure balanced tile at all focal points and perimeter walls. Dry layout confirmed before any thinset is mixed. Tile set with appropriate thinset for the tile type and substrate. Leveling clips on all large format tile. Full back-butter on every piece for complete mortar coverage. Consistent joint spacing throughout.
Step 5 — Grout and Sealing
Grout applied after full cure of the setting bed. Penetrating sealer on all grout joints. Epoxy grout at waterline, curb, and high-moisture contact points.
Step 6 — Final Walk Through
We review every tiled surface with you present, address any punch list items on the spot, haul away all debris and packaging, and leave your home clean.
Owner-operated, no subcontractors — Yohan personally works on or directly supervises every tile installation. The quality you see in our photos is the quality you get on your job.
Prep work is non-negotiable — We level, patch, and assess every substrate before tile is set. It takes longer. Your tile lasts decades longer because of it.
Debris removal always included — We haul away all old tile, flooring, grout dust, and packaging. Your driveway and yard are clean when we leave.
Written estimates, no surprises — What we quote is what you pay. We identify subfloor issues during the estimate — not after we've started.
Bilingual service — We serve Palm Coast's English and Spanish-speaking communities.
Why Palm Coast Homeowners Choose YG Tile Solution
Tile Installation FAQs — Palm Coast, FL
-
Tile installation in Palm Coast typically ranges from $8 to $12 per sq ft for standard porcelain or ceramic, including labor, mortar, grout, and seal. Large format tile (24x24 and larger) runs $12 to $18 per sq ft. Natural stone runs $15 to $22 per sq ft. Pool deck tile runs $10 to $18 per sq ft. Pricing depends on tile format, material, subfloor condition, and project scope. We provide free written estimates with itemized pricing — call (786) 833-5612.
-
Most standard tile floor installations in Palm Coast (600 to 1,200 sq ft) take 2 to 3 days including prep, setting, grouting, and sealing. Large format tile projects may take an additional day due to the precision required. Pool deck tile takes 2 to 4 days. Kitchen backsplash typically takes 1 day. We give you a firm timeline in your written estimate.
-
Yes — every time. Subfloor assessment is the first thing we do on every Palm Coast tile installation. We check flatness, identify high and low spots, test for moisture where relevant, and determine what prep is needed before any tile goes down. All subfloor work is included in your written estimate — no surprise prep charges mid-project.
-
For Palm Coast's humid Florida climate, porcelain tile is our top recommendation for most applications — floors, bathrooms, kitchens, and outdoor spaces. Porcelain handles Flagler County's humidity, salt air, and daily Florida wear better than ceramic, laminate, or natural stone without the maintenance requirements. For outdoor pool decks and patios, slip-resistant porcelain or travertine with proper sealing is the correct choice.
-
Yes. Large format porcelain — 24x24, 24x48, and 32x32 — is our most requested floor tile in Palm Coast right now. It requires a flatter substrate than standard tile, which is why we use leveling clips and back-butter every piece. Large format on an improperly leveled floor will have lippage and hollow spots within months. Our prep process prevents both.
-
Yes. Pool deck tile installation is one of our most requested services in Palm Coast and Flagler County. We use slip-resistant porcelain with a DCOF rating of 0.42 or higher and exterior-rated setting materials for Florida's UV and outdoor humidity. Expansion joints are placed at all field breaks to handle Florida's thermal cycling. Pool deck projects typically take 2 to 4 days.
-
Yes. We remove existing tile, LVP, laminate, vinyl, and carpet and haul away all debris before new tile goes in. Debris removal is included in every estimate — no dumpster rental needed. During demo we assess the exposed subfloor and address any moisture damage, old adhesive, or height transitions before new tile is set.
-
Yes. We install tile on pool decks, patios, outdoor kitchens, and covered lanais throughout Palm Coast. Every outdoor tile installation uses exterior-rated thinset and grout — indoor materials used outdoors will fail in Florida's climate within 1 to 3 years. We also verify adequate drainage slope on all outdoor horizontal surfaces.
-
Yes. YG Tile Solution is owner-operated and based in Palm Coast. Yohan personally works every tile installation in Flagler County — no subcontractors, no crews you have never met. When you hire us for a tile project in Palm Coast you get the same person who gave you the estimate doing the work.
-
Call or text (786) 833-5612, email ygtilesolution@gmail.com, or fill out the estimate form on this page. We will schedule a visit to your Palm Coast home, assess the installation area and subfloor, and provide a free written quote with itemized pricing within 24 to 48 hours. No charge, no obligation.
Get a Free Tile Installation Estimate in Palm Coast, FL
Ready to install tile in your Palm Coast home? Tell us the room, the tile type you are considering, and your timeline. We will respond fast with a clear written quote and next steps.